You may also like
Description - Install - Compatibility
We noticed that the optics sit slightly low when paired with the included front shroud, so we engineered a riser to elevate the dot above the hood without excessive height. In addition providing a precisely sized forward-slanting handle. This allows you to efficiently rack your slide using your belt, a tree, bench, or any ledge, enhancing your weapon manipulation with ease and reliability. Ideal for tactical applications, it offers expert-level functionality without compromising your setup.
CNC'ed from 60 Series Aluminum.
Slide Optic Thread Pattern:
- M3 Threads - SIG Gen1 & Gen2 slides
-
M4 Threads- Gen3 SIG-LOC slides, Norsso, Killer Innovations (Check slide manufacturer for specific slide thread pattern)
RMSc to RMSc
- Now compatible with M4 Threaded optic cuts with these screws: M4x14 Optic Screws, not included but add to cart and the price will be free.
- Aftermarket slides may be machined deeper that SIG OEM slides, if the pocket for the optic is deeper than 3.58 mm or 0.14" (9/64") then this RMSc to RMSc riser may result in the optic sitting slanted on the slide, which is not ideal we recommend the RMSc to RMR riser till we can address this issue.
-
Gen1 Slides (they have no rear iron sight when optic plate is removed) will interfere with the Eye Guard on the Raider brace/stock when collapsed. We are working on a shorter version but trimming it 1/8" will allow it to cycle while the brace/stock is collapsed.
RMSc to RMR
- Supplied with M4 and M3 slide mounting screws fit all M3 & M4 thread pattern slides (see above).
- Supplied with 6-32 screws for optic mounting (for best fit use the 6-32 screws supplied with the optic).
- Gen1 Slides (they have no rear iron sight when optic plate is removed) will interfere with the Eye Guard on the Raider brace/stock when collapsed. We are working on a shorter version but trimming it 1/8" will allow it to cycle while the brace/stock is collapsed.
- Very tight fit on some optics this is good! see video below.
Can I remove the slide and keep the Hood and Optic Charging Handle on?
| Gen1 Flux Hood | Gen2 Flux Hood | |||
| Slide | RMSc-RMSc | RMSc-RMR | RMSc-RMSc | RMSc-RMR |
| Gen1 | YES* | YES* | YES | YES |
| Gen2 | NO | NO | YES | NO |
| Gen3 (Sig LOC) | NO | NO | YES | NO |
| * Standard front iron sight may need to be permanently remove to pass the slide thru the hood. Raised irons sight will need to be removed. Aftermarket slides will vary. | ||||
Holster Fitment
Gen2 and Gen3 Slide will need a small trim on the back side of the holster. See Pic:
Recently viewed
Last seen items