You may also like
Press & drag to view
Description - Install - Compatibility
The Forward Halo is a front mounted accessory rail for the Flux Raider320
Details:
- M-Lok compatible attachment points (*see note below)
- Suppressor compatible (limited diameter sizes, with slide/barrel lengths see chart)
- Fixed 12 o'clock 1913 rail for forward optic mounting (this is game changer!!!)
- Charging handle compatibility is up in the air at the moment, doing our best to account for this but without sacrificing above details.
*Note: We are seeing some tolerance stacking issues on the mlok slots. While the Magpul accessories (owner of Mlok standard) fit some metal accessories are not fitting. So far what we are seeing not fit is Arisaka Defense. These brand are fitting metal or polymer accessories: Unity Tactical, Magpul, modlite buttons/switches, Surefire mlok light mounts. 2nd run ordered after 4/30/2025, if the smaller MOLK or half slot is too tight, insert the nut from the inside of the halo.
Options:
- Full MLOK - No slot up front for side charging
- Left Side Opening - slot for side charging on the left side of the gun when aiming down sights
- Right Side Opening - slot for charging on the right side of the gun when aiming down sights
Benefits:
- Larger eye box/eye relief when optic mount on Halo
- Night vision compatible
- Weight added up front for reduced felt recoil
- More mounting for accessories
- Keep space for off hand grip.
Compact Slide/Barrel Suppressor Compatibility:
We will update the product page here with more compatibility as customers email in. A general rule is to measure the suppressor diameter near the threaded end, about 1-2" from the threaded end and if that diameter is less than 1.4" there is a high chance for fitment on a compact slide, on full size barrels check the diameter at the threads about 1/2" from he end is less than 1.6" it should fit.
| Supressor | OD | Compact Threaded Barrel | Full Size Threaded Barrel |
| SIG Modx-9 | 1.34" | Yes | Yes |
| Rugged Obsidian 9 | 1.37" | Yes | Yes |
| Spectre 9 & 9K | 1.35" | Yes, w/ Griffin Easy Lock | Yes |
| Omega 36M | Yes | ||
| Griffin resistance 9 | 1.39" | NO, Slight contact | Yes |
| AB prototype F-4 | 1.47" | NO, Slight contact | Yes |
| Mojave 9 | 1.37" | NO, Slight contact | Yes |
| PTR Vent 9 | 1.49" | NO, | Yes |
| The Q Erector | 1.37" | NO, slight contact | Yes |
IMPORTANT: While the suppressor may fit we are making no claim to the suppressor properly cycling with your setup. in fact none of these have been tested for reliably cycling, just for fit.
Install:
PDF - Install Guide
Video: IMPORTANT UPDATE torque settings to 15 in-lbs.
Recently viewed
Last seen items